DURKOPP ADLER 911-210-3020-10, Operating Instructions Manual

Page: 58 / 128

Programming
56 Operating Instructions 911-210-10 - 00.0 - 06/2020
Saving a seam program
After you have defined all the seam paths, you can save the seam program
and specify a name for the program.
1. Press the Speich...(Save...) button.

The window for entering the name of the seam program opens.
2. Enter the desired name (

p. 43 ) and adopt the change by pressing
OK (
CR
).

The seam program is now available under this name for sewing,
editing or copying.
Important
Always perform a contour test after creating a new seam program
(

p. 56 ).
5.10.2 Performing a contour test
Perform a contour test every time after creating a new seam program or
editing a seam contour to ensure that the contour you entered lies within
the permissible sewing field.
To perform a contour test:
1. Press the menu items
Bearbeiten (Edit)
>
Nahtprogramm
(Seam program) > Konturtest (Contour test) .

The
Konturtest (Contour test)
window appears.
NOTICE
Property damage may occur!
If you have entered contour points that lie outside the sewing field,
the movement of the clamps during sewing can cause damage to the
machine or the sewing material.
Always perform a contour test after creating or editing a contour to
ensure that the entire contour lies within the permissible sewing field.