DURKOPP ADLER 911-210-3020-10, Operating Instructions Manual

Page: 59 / 128

Programming
Operating Instructions 911-210-10 - 00.0 - 06/2020 57
Fig. 37: Performing a contour test
2. Move along the contour stitch by stitch using the Vor (Forwards) and
Zurück (Back) buttons or the pedal.
3. Check that all points lie within the sewing field.
5.10.3 Editing a seam program
You can change the contour and the sewing parameters of existing seam
programs. The changes are applied to the seam program that is currently
open on the start screen.
To edit an existing seam program:
1. Open the seam program you wish to modify via the menu items Datei
(File) > Öffnen (Open) .

The seam program opens on the start screen.
Changing the contour of a seam program
To change the contour of a seam program:
1. Press the menu items Bearbeiten (Edit) > Nahtprogramm
(Seam program)
>
Konturanpassung (Contour
adjustment) .

The contour adjustment window appears:
NOTICE
Property damage may occur!
If you have entered contour points that lie outside the sewing field,
the movement of the clamps during sewing can cause damage to the
machine or the sewing material.
Always perform a contour test after creating or editing a contour to
ensure that the entire contour lies within the permissible sewing field.