DURKOPP ADLER 911-210-3020-10, Operating Instructions Manual

Page: 81 / 128

Programming
Operating Instructions 911-210-10 - 00.0 - 06/2020 79
5.13 Testing the functions of the machine
You can use the
Extras
>
Service
>
Multitest (Multi
test) menu item to check the inputs and outputs, test the sewing motor
and set the stroke position.
Fig. 50: Testing the functions of the machine
Information
The
Transportklammer (Transport clamp)
function
is only intended for use by Dürkopp Adler Service personnel.
5.13.1 Testing inputs and outputs
Important
The instructions only provide an overview of the test possibilities.
The tests may only be performed by qualified specialists that have re-
ceived training from Dürkopp Adler.
To test inputs and outputs:
1. In the menu item
Extras
>
Service
>
Multitest (Multi
test) press the Eingänge / Ausgänge testen (Test
inputs / outputs)
option.

The IO Test Seite (Page) window is displayed.
WARNING
Risk of injury from sharp and moving parts!
Puncture or crushing possible.
Do NOT reach into the machine during function
testing of inputs and outputs.