DURKOPP ADLER 911-210-3020-10, Operating Instructions Manual

Page: 72 / 128

Programming
70 Operating Instructions 911-210-10 - 00.0 - 06/2020
5.11 Editing machine parameters
You use the machine parameters to define the basic machine settings.
These basic settings apply to all programs.
To edit the machine parameters:
1. Press the menu items Bearbeiten (Edit) > Maschinen-
parameter (Machine parameters)
.

The window for selecting the machine parameter group appears.
Fig. 46: Editing machine parameters
2. Press the desired parameter group.

The individual parameters of this group are displayed.
3. Press the desired parameter.

The window for modifying the parameter value opens.
4. Set the parameter to the desired value (

p. 44 ).
There are 6 machine parameter groups:
Symbol Parameter group
MP1 - Configuration
General settings
MP2 - Limit values
Limit values for speeds and positions
MP3 - Needle thread monitor
Behavior after thread breaking
MP4 - Thread cutting
Speed, position and tension
MP5 - Thread clamping
Starting angle
MP6 - Counters
Settings for program and bobbin counters