DURKOPP ADLER 911-210-3020-10, Operating Instructions Manual

Page: 57 / 128

Programming
Operating Instructions 911-210-10 - 00.0 - 06/2020 55
Drawing a path
7. Use the arrow buttons to move the cursor to the end point of the desired
path.
Information
Alternatively, you can press an arrow button once in order to define the
direction and then continue moving in this direction by pressing the pedal.
Important
Take care to ensure that the contour remains within the permissible
sewing field of the machine.
Especially with curved paths, you should remember that the start and end
points are not directly connected and that a curve is generated between
these two points.
8. Press the OK button.

The seam path is adopted with the specified parameters.
Adding further seam paths
You can now define all further seam paths in the same manner.
1. Begin every new seam path by selecting the type of line (

p. 54 ).
Deleting a seam path
1. Press the Löschen (Delete) button.

The last section of the seam path is deleted.
Thread tension
Stroke height
Thread cutting
Button Meaning