DURKOPP ADLER 911-210-3020-10, Operating Instructions Manual

Page: 61 / 128

Programming
Operating Instructions 911-210-10 - 00.0 - 06/2020 59
Fig. 40: Changing the contour of a seam program (3)
6. Select the desired technology operation(s) for the new seam path
(

p. 40 ).
7. Confirm the selection with OK .

You are returned to the detail window with the modified contour.
8. Press the Weiter (Next) button.

A query dialog is displayed, asking if you wish to adopt the changes.
Confirm the query dialog with
JA (YES) to save the modified contour.
Important
Always perform a contour test after modifying a contour to ensure that the
new seam path lies within the permissible sewing field (

p. 56 ).
Changing seam program parameters
You can change the general settings that apply to the entire seam program.
To change the seam program parameters:
1. Press the menu items Bearbeiten (Edit) > Nahtprogramm
(Seam program)
>
Parameter (Parameters)
.

The window for selecting the program parameter group appears: