DURKOPP ADLER 911-210-3020-10, Operating Instructions Manual

Page: 121 / 128

Troubleshooting
Operating Instructions 911-210-10 - 00.0 - 06/2020 119
8351 Test pins error • Switch off and on the machine
• Software update
• Notify DA Service
8400 Control panel has no valid program
for the DAC. Load the current program into the
control panel from a USB key.
8401
8402 Control panel has no valid program
for the DAC. Load the current program into the
control panel from a USB key.
8403 Program in DAC is no longer current. Load the current program into the
DAC.
8404
8407
DAC update was faulty. • Attempt the update again
• Check cable connection
• Replace the DAC
8408 Waiting for a DAC reset. Wait until the restart has been
performed
(Duration: several seconds).
8411 DAC program check is active. Wait until the test has been performed
(Duration: several seconds).
8414 DAC update succeeded.
8801
8805
8806
8890
8891
Error in test pins/signal processing/
event processing/
Memory wrapper/
list functions
Internal error • Switch off and on the machine
• Software update
• Notify DA Service
System
9000 Reference run active
9002 Machine head not locked Lock machine head
9006 Quick-stop switch is activated. Releasing the quick-stop switch
9016 Wrong bar code ID Change the program
9100 The counter has not reached the
default value. Press the OK button. The counter is
reset.
9601 Stop while sewing on the contour
Continue sewing? • OK button =
Continuing the sewing process
• ESC button =
Canceling the sewing process
9700 Bobbin case retainer for bobbin
change not closed Close the bobbin case retainer for
bobbin change
9701 Parallel clamps not lowered • Remove obstacles
• Align sensors
9900 Incorrect machine parameters Initialize the data
9901 Incorrect sequences Initialize the data
9902 Incorrect program parameters Initialize the data
Code Description Troubleshooting