DURKOPP ADLER 911-210-3020-10 Operating Instructions Manual Download Page 109

Page: 109 / 128

Setup

Operating Instructions 911-210-10 - 00.0 - 06/2020

107

7.9

Pneumatic connection

The pneumatic system of the machine and of the additional equipment must
be supplied with dry and oil-free compressed air. The supply pressure must
lie between 8 and 10 bar.

7.9.1 Assembling the compressed air maintenance unit

Fig. 71: Assembling the compressed air maintenance unit

To assemble the compressed air maintenance unit:

Connect the connection hose (2) to the compressed air supply using
a hose coupling R 1/4”.

NOTICE

Property damage from oily compressed air!

Oil particles in the compressed air can cause malfunctions of
the machine and soil the sewing material.

Ensure that no oil particles enter the compressed air supply.

NOTICE

Property damage from incorrect adjustment!

Incorrect system pressure can result in damage to the machine.

Ensure that the machine is only used when the system pressure is
set correctly.

(1)

- Connection hose

①

Summary of Contents for 911-210-3020-10

































































































































Search results

Summary of Contents for 911-210-3020-10

Reviews:

Related manuals for 911-210-3020-10

Brands by name

Popular brands

DURKOPP ADLER 911-210-3020-10, Operating Instructions Manual

Search results

Summary of Contents for 911-210-3020-10

Reviews:

Related manuals for 911-210-3020-10

Brands by name

Popular brands