DURKOPP ADLER 911-210-3020-10, Operating Instructions Manual

Page: 22 / 128

Operation
20 Operating Instructions 911-210-10 - 00.0 - 06/2020
4.4 Changing the needle
Fig. 4: Changing the needle
To change the needle:
1. Push the hand crank (1) down and rotate it to the left until the needle
bar (2) reaches the highest position.
2. Loosen the screw (4).
3. Pull the needle downwards out of the needle bar (2).
4. Insert the new needle into the needle bar (2) until it reaches the end
stop.
Important
The groove (3) must face toward the hook.
5. Tighten the screw (4).
WARNING
Risk of injury from sharp and moving parts!
Puncture possible.
Switch off the machine before you change the
needle.
Do not reach into the needle tip.
NOTICE
Property damage may occur!
Machine damage possible from incorrect hook side clearance.
When switching to a different needle thickness, adjust the distance
between needle and hook (

Service Instructions ).
(1) - Hand crank
(2) - Needle bar
(3) - Groove
(4) - Screw
④
③
①
②