DURKOPP ADLER 911-210-3020-10, Operating Instructions Manual

Page: 76 / 128

Programming
74 Operating Instructions 911-210-10 - 00.0 - 06/2020
Position of bobbin change X
The value range varies depending on the subclass and sewing field size
Position of bobbin change Y
The value range varies depending on the subclass and sewing field size
MP4 - Thread cutting
Symbol Meaning
Cutting speed
(min. = 70 .. max. 500; Def. 180 rpm)
Speed of the cutting stitch
Cutting position on
(min. = 0° .. max. 359°; Def. 180°)
Angular position of the needle at which the thread cutting knife is switched
on
Cutting position off
(min. = 0° .. max. 359°; Def. 359°)
Angular position of the needle at which the thread cutting knife is switched
off
Thread tension during thread cutting
(min. = 00 .. max. 100; Def. 10 %)
Thread tension of the cutting stitch
Position for thread tension during thread cutting
(min. = 0° .. max. 400°; Def. 370°)
Starting angle for the thread tension during the cutting stitch
(At an angle greater than 359° the thread tension is activated in the next stitch.)
MP5 - Thread clamping
Symbol Meaning
Close thread clamp at 1
st
stitch
(min. = 0° .. max. 250°; Def. 180°)
Start angle for closing the thread clamp during the first stitch
Open thread clamp at 1
st
stitch
(min. = 0° .. max. 359°; Def. 340°)
Starting angle for opening the thread clamp during the first stitch.
If the closing and opening angles are the same then the thread clamp is not
activated
Symbol Meaning