DURKOPP ADLER 911-210-3020-10, Operating Instructions Manual, Page: 111 / 128

Setup
Operating Instructions 911-210-10 - 00.0 - 06/2020 109
7.10 Performing a test run
When setup is complete, perform a test run to check the functionality of
the machine.
To perform a sewing test:
1. Switch off the machine.
2. Thread the needle thread (

p. 22 ).
3. Insert the bobbin (

p. 26 ).
4. Switch on the machine.

The control is initialized.
5. Press the pedal forwards.

The reference run starts.
The transport carriage moves to the reference position.
Information
The reference run is necessary in order to obtain a defined starting
position of the transport carriage.
Pressing the pedal forwards triggers the different steps of the insertion
procedure one after another and then starts the sewing process.