DURKOPP ADLER 911-210-3020-10, Operating Instructions Manual

Page: 37 / 128

Programming
Operating Instructions 911-210-10 - 00.0 - 06/2020 35
5.3 Starting the software
After it was switched on, the machine performs a reference run. After this,
the start screen is shown for a few seconds.
Fig. 16: Starting the software (1)
Here you can select the user interface language or use
Service
to
quickly access the Multitest (Multi test) menu.
Extras Display options:
Full-screen and zoom
Technician menu:
Adjustments, system
information and tests
Vollbild ein/aus
(Full screen on / off)

p. 45
Zoom ein/aus
(Zoom on / off)

p. 45
Service Einstellungen
(Settings)

p. 76
System-Information
(System information)

p. 83
Multitest (Multi test)

p. 79
Initialisierung und
Update (Initialization
and update)

p. 84
Hersteller (nur für DA-Personal)
(Manufacturer (for DA personnel only))
Korrektur
(Correction) Short-term sewing with
other values Fadenspannung
(Thread tension)

p. 47
Nähdrehzahl (Speed)

p. 48
Buttons on the start screen
Continue sewing the contour from a particular
point Reparatur-Modus
(Repair mode)

p. 50
Allow for a manual bobbin change Spulenwechsel
(Bobbin change)

p. 48
Reset counter to a particular value Zählerreset
(Reset counter)

p. 52
Menu items in popup menus
Menu item Function Sub-items Sub-items Described on
(1) - Button language selection (2) - Button Service
① ②