DURKOPP ADLER 911-210-3020-10, Operating Instructions Manual

Page: 51 / 128

Programming
Operating Instructions 911-210-10 - 00.0 - 06/2020 49
5.7.1 Changing the bobbin
Fig. 32: Changing the bobbin
To change the bobbin:
1. Press the Spulenwechsel (Bobbin change) button.
2. Change the bobbin (

p. 48 ).
3. Use the Vor (Forwards) and Zurück (Back) buttons to
move to the point where sewing is to continue.
4. Press the Weiternähen (Continue sewing) button.

The program jumps back to the start screen and sewing of the seam
continues from the selected point.
5.7.2 Bobbin change without a request from the program
If you wish to independently insert a new bobbin without being requested
to do so by the program, you have to press the
Spulenwechsel (Bobbin
Change) button on the start screen after changing the bobbin.
This will inform the program that a new bobbin has been inserted, causing
it to resume counting thread consumption starting with the full bobbin
capacity.
5.7.3 Updating the bobbin capacity
To update the bobbin capacity:
1. Press the button Spulenwechsel (Bobbin Change) on
the start screen.

The counter for the bobbin capacity begins anew with a full bobbin.