Dressler 13150 400 V, User Manual

Page: 109 / 176

HPG 13150 400 V (A) Installation, Setup, and Operation 5-5
HPG™ 13150 400 V RF Power Generator
Prerelease version
Connecting Communication Interfaces
The communication interfaces that you use will depend on how you want to
communicate with the HPG generator and which interface options you have.
The unit provides several communication interface options that allow you to
control the unit remotely: a 25-pin
User Port and an RS-232 Host port, a
PROFIBUS Host port, or an Ethernet Host port.
To determine which communication interfaces your unit has, see
“Understanding Model 13150 400 V Options” on page 1-2 .
Note: Even if you are not using the User Port port for communication, some
User Port circuits must be satisfied to operate the HPG generator. For
more information, see “HPG Generator User Port” on page 4-4 .
To Connect the Communication Interfaces:
Make each interface connection. For specific information on the interface
connections, including pin descriptions and communication protocols, see
Chapter 4, “Communication Interfaces.”
Connecting the HPG Generator to a System Interlock Loop
In order for the HPG generator to operate, you must satisfy the interlock
requirements. For more information, see
“Satisfying Minimal 25-Pin User Port
Requirements” on page 4-4.
Connecting AC Input (Mains) Power
Before making any input line power connection, turn off and lockout/
tagout all circuit breakers supplying input power to the HPG generator.
Never connect the generator to the mains while the cabinet is open.