Dräger Savina 300, Technical Documentation Manual, Page: 34 / 166

N
o
.13
09
_00
00
00
122
7_
Pu
bl
ic
ati
on
34
Savina 300
Maintenance instructions
Disassembling/assembling the device
Filter cover
Removal 1. Withdraw the power cable ( Fig. 23 /2) from filter cover guide.
2. Reach into the openings in the filter cover on both sides, press the
catches concealed behind them ( Fig. 23 /1) simultaneously towards A
slightly, move the filter cover back slightly and take the filter cover out of
the rear panel.
Fig. 23 View of device rear; filter cover
Removal of the filter cover is complete.
Installation 1. Slot the tabs ( Fig. 24 /1) of the filter cover into the recesses ( Fig. 24 /2) in
the rear panel, swivel the filter cover upwards and press the catches ( Fig.
23 /1) of the filter cover into the rear panel until they lock in place.
Fig. 24 Detail view of filter cover; tabs and recesses
2. Lay the power cable ( Fig. 23 /2) around the filter cover guide, as shown in
the illustration.
Fitting of the filter cover is complete.