Dräger Savina 300, Technical Documentation Manual, Page: 132 / 166

N
o
.02
08
_00
00
00
253
3_
Pu
bl
ic
ati
on
6DYLQD
Electrical safety
Electrical safety to EN 62353
22 / 50
6DYLQD 5HYLVLRQ
Action • Prepare the test setup.
• (applied part) Connect the device-specific test adapter on one end to the
device under test and on the other end to the tester's configurable socket
„A“ for applied parts (paying attention to the configuration!).
• Follow the instructions on the tester.
Test The initial value must not exceed 10 μA „IAC“.
Entry Initial value „IAC“
[________μA]
Test The initial value must not exceed 100 μA „IDC“.
Entry Initial value „IDC“
[________μA]
Test The recurrent test value must not exceed 10 μA „IAC“.
Entry Recurrent test „IAC“
[________μA]
Test The recurrent test value must not exceed 100 μA „IDC“.
Entry Recurrent test „IDC“
[________μA]
NOTE
The test must be performed twice! The second test is performed with the
plug rotated 180° in the socket. In many test devices the mains plug rotation
is simulated by means of a built-in selector switch. The higher measured val-
ue must be documented.
NOTE
The reference values (initial values measured) should always be entered in
the „Test Report“ or „Result Sheet“ document!
NOTE
If the measured values are between 90% and 100% of the permissible limit
value, the reference value and the previously measured values of the recur-
rent test should be applied to assess electrical safety!