DPS NetGuardian 832A, User Manual

Page: 72 / 107

67
Analog Polarity {get,set} alg {1...8} polarity 0=Normal
1=Reversed
Analog Group Number {get,set} alg {1...8} group {mju,mnu, mno,mjo} {1...8}
Analog Reference 1
VDC
{get,set} alg {1...8} ref1 Number
Analog Reference 1
Display
{get,set} alg {1...8} disp1 Number
Analog Reference 2
VDC
{get,set} alg {1...8} ref2 Number
Analog Reference 2
Display
{get,set} alg {1...8} disp2 Number
Analog Deadband {get,set} alg {1...8} deadband {0.1...9.9}
Alarm Description {get,set} alm {base,exp1,exp2,exp3} {1...64}
desc
string {0...48} chars
Alarm Polarity {get,set} alm {base,exp1,exp2,exp3} {1...64}
polarity
0=Normal
1=Reversed
Alarm Trap {get,set} alm {base,exp1,exp2,exp3} {1...64}
trap
0=trap disabled
1=trap enabled
Alarm Primary
Notification
{get,set} alm {base,exp1,exp2,exp3} {1...64} pri {0...8}
Alarm Secondary
Notification
{get,set} alm {base,exp1,exp2,exp3} {1...64}
sec
{0...8}
Alarm Group {get,set} alm {base,exp1,exp2,exp3} {1...64}
group
{1...8}
Global Trap IP Address {get,set} trap {1,2} ipa IP Address
Global Trap Format {get,set} trap {1,2} format {v1, v2c, v2cinf,v3}
LCD Display Mode {get,set} lcdmode {scroll,point}
LCD Delay Time (for
Point Mode)
{get,set} lcddelay {1..60} {sec}
Examples
· You want to find out how long this NetGuardian
has been running (since last rebooted.) Get
system uptime by typing
get sysuptime , then
press Enter.
· You want to see the alarm description for Base
Alarm 1. To see the description, type
get alm
base 1 desc
· You want to set the Global Trap IP Address to
126.10.230.133. To enter this, type
set trap 1
ipa = 126.10.230.133
· You want to change the LCD mode from Scroll
(default) to Point Mode. To change this, type
set
lcdmode = point