DPS NetGuardian 832A, User Manual

Page: 56 / 107

51
7.2.1 Sound off
Fig. 7.3.1.1. Sound Off command
Sound off
The Sound off command suppresses sounds from the alarm speaker for a user-defined period of 10,
20, or 30 minutes.
To scroll to the next menu command, press the q button.
To change the Sound off setting, press Sel to select the command. The arrow cursor (>) will move
to the right of the colon (:) in Sound off : to indicate that the command submenu is selected. Press the q
and p buttons to scroll through the Sound off time period options. Select 0 minutes to allow all sounds.
When the time period you want is displayed, press Sel to make your selection.
To exit the Command
Menu without changing the Sound off setting, press Menu.
7.2.2 Reboot
Fig. 7.3.2.1. Reboot command
Reboot
The Reboot command reboots the NetGuardian. Press Sel. The LCD will briefly display the message
Rebooting ..., and the normal boot sequence will begin.
To exit the Command Menu without rebooting,
press Menu.
7.2.3 Run Config
Fig. 7.3.3.1. Run Config command
Run Config
The Run Config command forces the TTY configuration interface to run over the craft port at the user
defined baud rate (default is 9600 baud).
To run the TTY configuration utility, press Sel. To exit the Command Menu without running the
TTY interface, press Menu.