DPS NetGuardian 832A, User Manual

Page: 77 / 107

72
Monitoring 13.3
13.3.1 Monitoring the NetGuardian
Connect a PC running VT100 terminal emulation software to the craft port or connect via LAN using a
Telnet client with VT100 emulation to port 2002 to reach the monitor menu selection. This section allows
you to do full system monitoring of the NetGuardian including: all alarms, ping information, relays,
analogs, and system status.
Fig. 13.3.1.1. The monitor menu allows status checking on all elements
13.3.1.1 Monitoring Base Alarms
View the status of the device connected to the discrete alarms from the M)onitor menu > A)larms
option. Under
Status , the word Alarm will appear if an alarm has been activated and Clear will appear if
an alarm condition is not present. If groups are used the user defined status will be displayed.
Fig. 13.3.1.1.1. This example shows page two of the discrete alarms