Doosan DBC 130 II, Installation Manual

Page: 48 / 122

46
DBC 130II DBC130II ISE41
6.4 Injecting the grout mixture
1) Pour the grout mixture in a single direction from one side of the foundation hole so that
the mixture can fill in the hole evenly without the buildup of air bubbles.
2) Grout compacting
Use a pipe or long thin pole to keep stirring in
the grout mixture so that the mixture fills up the
whole hole evenly without the buildup of air
bubbles.
3) Clean up the floor when the foundation holes
are filled up with grout.
※ Pour the grout mixture at an average of 40 mm
above the level plate. Make sure there is no
gap between foundation surface and level
plate (keep an eye on the rear plate which is
barely noticeable).
※ Inject grout after completing the anchor hole work , so that the level plate submerges in the
anchor hole.
Desirable (O) Desirable (O)