manualshive.com logo in svg

Dodge 2014 SRT Viper, Owner'S Manual

The Dodge 2014 SRT Viper Owner's Manual is a comprehensive guide that provides detailed instructions and information about the iconic sports car. This essential manual covers everything from maintenance schedules to advanced driving techniques. Download this manual for free from manualshive.com and unleash the full potential of your SRT Viper.

Share
Download
background image

•

Mixing engine coolant (antifreeze) types is not recom-
mended and can result in cooling system damage. If
HOAT and OAT coolant are mixed in an emergency,
have a authorized dealer drain, flush, and refill with
OAT coolant (conforming to MS.90032) as soon as
possible.

Cooling System Pressure Cap

The cap must be fully tightened to prevent loss of engine
coolant (antifreeze), and to insure that engine coolant
(antifreeze) will return to the radiator from the coolant
recovery bottle.

The cap should be inspected and cleaned if there is any
accumulation of foreign material on the sealing surfaces.

WARNING!

•

The warning words “DO NOT OPEN HOT” on the
cooling system pressure cap are a safety precaution.
Never add engine coolant (antifreeze) when the
engine is overheated. Do not loosen or remove the
cap to cool an overheated engine. Heat causes
pressure to build up in the cooling system. To
prevent scalding or injury, do not remove the
pressure cap while the system is hot or under
pressure.

•

Do not use a pressure cap other than the one
specified for your vehicle. Personal injury or en-
gine damage may result.

Disposal Of Used Engine Coolant

Used ethylene glycol-based engine coolant (antifreeze) is
a regulated substance requiring proper disposal. Check
with your local authorities to determine the disposal

330

MAINTAINING YOUR VEHICLE

Summary of Contents for 2014 SRT Viper

















































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2014 SRT Viper

Davis Instruments 8127 Installation Instructions Manual preview
8127
Brand: Davis Instruments Pages: 16
Dakota Digital Retrotech RTX-68D-CHG Quick Start Manual preview
Retrotech RTX-68D-CHG
Brand: Dakota Digital Pages: 4
Mobis G4211ADE00AL Installation Instructions Manual preview
G4211ADE00AL
Brand: Mobis Pages: 16
Subaru starlink Manual preview
starlink
Brand: Subaru Pages: 216
GMC SIERRA 2002 Manual preview
SIERRA 2002
Brand: GMC Pages: 499
Kia Amanti Owner'S Manual preview
Amanti
Brand: Kia Pages: 290
METRON PC05T User Manual preview
PC05T
Brand: METRON Pages: 4
Thule 1809 Instruction Manual preview
1809
Brand: Thule Pages: 4
Cadillac STS 2011 Owner'S Manual preview
STS 2011
Brand: Cadillac Pages: 529
Toro 07389 Installation Instructions Manual preview
07389
Brand: Toro Pages: 16
Toyota Avalon 2001 Operating Manual preview
Avalon 2001
Brand: Toyota Pages: 295
Classic AutoAir Mustang 1969 Installation Manual preview
Mustang 1969
Brand: Classic AutoAir Pages: 44
Havis-Shields Telescoping Computer Base C-TCB-34 Install Instructions preview
Telescoping Computer Base C-TCB-34
Brand: Havis-Shields Pages: 1
PEUGEOT 106 2001 Owner'S Manual preview
106 2001
Brand: PEUGEOT Pages: 107
Ford C-Max Energi 2014 Quick Reference Manual preview
C-Max Energi 2014
Brand: Ford Pages: 10
Bulldog Security BulldogOne BD1 User Manual preview
BulldogOne BD1
Brand: Bulldog Security Pages: 7
EUFAB 16559 Operating Instructions Manual preview
16559
Brand: EUFAB Pages: 12
Yakima K682 Instructions Manual preview
K682
Brand: Yakima Pages: 10

Brands by name

Popular brands

Load more brands