Docomo Foma SH905iTV, Instruction Manual

Page: 562 / 579

29
Manual for PC connection setting_DT20.fm
J
Devices required for data
communication (OBEX)
To perform data communication, downloading
OBEX-compliant data transfer software from the
Internet, and installing this software to your PC is
necessary. Refer to the software manual for
information on operating environment and installation
methods. In addition, installation of the FOMA
Communication Setting File (
n
P. 5 to P. 7) is
necessary beforehand.
A FOMA USB Cable with Charge Function 01 is
required to connect the FOMA terminal to a PC.
Send data from a PC to a FOMA terminal one item at a
time.
Sending one item at a time from a FOMA terminal to a
PC is not possible.
Data transfer operating methods differ depending on
the software used. Refer to the software manual for
details.
1
Send data from a PC using data
transfer software (Write 1).
Refer to the software manual for details on
sending data.
Send and receive all data at once, between a PC and
the FOMA terminal.
“Write all” and “Read all” operations require data
transfer software and your FOMA terminal
authentication password.
Data transfer operating methods differ depending on
the software used. Refer to the software manual for
details.
1
Send data from a PC using data
transfer software (Forward all).
Refer to the software manual for details on
sending data.
Entering your authentication password on the
PC will be necessary.
Enter your authentication password (four digits).
2
Enter terminal security code (four to
eight digits) and the authentication
password (four digits).
3
Start data transmission.
Note
The FOMA terminal data communication (OBEX)
function conforms with IrMC1.1. However, depending
on the function, some data may not be sent or
received even when the other party’s terminal
complies with IrMC1.1.
Sending Single Data Item (Write 1)
Note
When phonebook data is sent (from a PC to the
FOMA terminal handset) one entry at a time, entries
are saved to the smallest available memory number
from [010] to [999]. If all memory numbers from [010]
to [999] are already used, entries are saved to the
smallest available memory number between [000]
and [009].
When phonebook data is received and 1,000 entries
(names, phone numbers, or mail addresses) are
already registered, or more than 1,000 entries have
been registered, a message appears notifying that
no further entries can be saved.
Sending All Data (Write All/Read All)
Note
Performing Write all from a PC to your FOMA
terminal replaces all data stored in the FOMA
terminal. All data previously stored in your FOMA
terminal will be deleted. This includes phonebook,
Schedule, and protected mail data saved as secret
data.
If an error occurs during data transmission from a PC
to the FOMA terminal, all data stored in the FOMA
terminal may be deleted. Check the cable
connection, the FOMA terminal battery level, and the
PC power supply before performing Write all.
Performing operations while charging the FOMA
terminal in the desktop holder is recommended.
Depending on the connected device, the
transmission status (bar display) may not appear.
Manual for PC connection setting_DT20.fm 29 ページ ２００７年１２月２５日 火曜日 午後３時４５分