Docomo Foma SH905iTV, Instruction Manual

Page: 62 / 579

60
e03_dt20_7e.fm
[60/86]
Vo
ic
e/Vi
d
eop
ho
ne
C
all
s
Voice calls
Calls can be made even when steps 1 and 2 are reversed. If no
operations are performed for approximately 5 seconds after
entering the phone number, the call is made.
Videophone calls
Videophone call is not connected when placed to an unsupported
handset. In addition, it is not connected to devices such as PHS
phones for which 64K cannot be used due to network conditions.
If Call Waiting is subscribed to, the number is recorded in
Received calls and the stock icon
B
(missed call) appears when
a voice/Videophone call is received during a Videophone call.
During a Videophone call, i-mode mail and Message R/F are held
at the i-mode center.
When the sending/receiving of audio or video fails, the Videophone
call is not automatically restored. Make the Videophone call again.
When your image taken with the camera is sent during a
Videophone call in the Cycloid position, the displayed image is
made larger than that in the normal position.
When the Videophone call does not connect
When the Videophone call does not connect, a message explaining
the reason appears. The other party’s actual conditions may vary
depending upon the type of phone and network service subscriptions.
[Check number, then redial]: A call is made to unused phone
number.
[Busy]: The other party is engaged in a call (The message may
appear during a packet transmission depending on the other
party’s terminal).
[Your call is being forwarded]: The other party’s handset is set
to forward Videophone calls.
[Out of service area/power off]: The other party is outside the
service area, or their mobile phone is turned off.
[Set caller ID to on]: Connected without notifying caller ID
(When calling visualnet, etc.).
Note
[Redial using voice call]: The other party’s handset is set to the
Call Forwarding Service and the forwarding destination does
not support Videophone.
[Busy with packet transmission]: The other party is performing a
packet transmission.
[Upper limit has been exceeded. Connection failed]: Upper limit
that has been set by payment plans with limit function (Type
Limit or Family Wide Limit) has been exceeded.
[Please make your call from the i-mode web page]: A
Videophone call is directly made to the V-live which should be
accessed after connecting to i-mode. Access a site run by the
contents provider and view it by making a Videophone call from
the link.
[Connection failed]: Appears in cases other than any reasons.
Hands-free
Precautions on using Hands-free
n
“Setting Hands-free
Videophone” on P. 83
Cannot be operated when receiving a call and dialing a voice call.
Hands-free is disabled when a call ends.
Related Operations
Place calls on hold
<Hold Active Call>
1
During a call, press
C /
[Hold Active Call].
Alternatively, press
t
during a Videophone call.
2
To resume a call, press
s
.
Alternatively, press
C
during a voice call.
Press
i
during a Videophone call to resume with a
substitute image.
Add to phonebook during a voice call
<Add to phonebook>
During a voice call, press
C /
[Add to phonebook]
/
add
to the phonebook.
Note
dt20_E.book 60 ページ ２００７年１２月２５日 火曜日 午後２時２２分