Docomo Foma SH905iTV, Instruction Manual

Page: 538 / 579

5
Manual for PC connection setting_DT20.fm
To connect the FOMA terminal to your PC for
data communication, installation of the FOMA
Communication Setting File from the
accompanying CD-ROM is required
(
n
P. 5 to P. 8).
Install the FOMA PC Setup Software from the
accompanying CD-ROM to a PC and make a
variety of necessary settings to perform packet
transmission and 64K data communications
connecting the FOMA terminal to the PC (
n
P. 8).
The FirstPass PC Software enables access to
FirstPass supported sites via a PC Web browser
with user certificates obtained by the FOMA
terminal.
Refer to “FirstPassManual” on the accompanying
CD-ROM for details. Adobe
®
Reader
®
(version
6.0 and above is recommended) is required to
view “FirstPassManual” (PDF format).
Connect the FOMA terminal to your PC with
both devices turned on. If the FOMA
Communication Setting File is already
installed,
appears on the FOMA terminal
screen.
1
Insert the FOMA side of the FOMA
USB Cable with Charge Function 01
(sold separately) into the external
connection terminal on the FOMA
terminal (
S
).
2
Insert the PC side of the FOMA USB
Cable with Charge Function 01 into
the PC USB connector (
T
).
How to remove
1
Hold the release button on the FOMA terminal
side of the FOMA USB Cable with Charge
Function 01 (
S
), and pull out from the FOMA
terminal (
T
). Pull by force may cause a
malfunction.
2
Pull the FOMA USB Cable with Charge
Function 01 out from the PC.
To make data communication by connecting
the FOMA terminal to a PC, the FOMA
Communication Setting File is required. Install
the file before connecting the FOMA terminal
for the first time to the PC.
Install on the PC using a user with administrator rights.
Perform steps 1 to 3 first, and then connect the FOMA
terminal to the PC.
FOMA Communication Setting File
Note
If installation fails and [FOMA SH905iTV] is not listed
in the screens of step 3 of “Confirming the Installed
FOMA Communication Setting File (Driver)” on P. 6,
uninstall the FOMA Communication Setting File
(
n
P. 7) and install it again.
If, for some reason, the PC is unable to recognize the
FOMA terminal, uninstall the FOMA Communication
Setting File (
n
P. 7) and install it again.
FOMA PC Setup Software/FirstPass
PC Software
Connecting the FOMA
Terminal to Your PC
Connecting Using the FOMA USB
Cable with Charge Function 01
Keep side with
the characters up
Open external
connection terminal
cover
FOMA USB
Cable with
Charge
Function 01
T
S
Note
Connecting the FOMA terminal while charging in the
desktop holder is also possible.
Do not remove the FOMA USB Cable with Charge
Function 01 during data transmission. Otherwise,
transmission disconnection or data loss may occur.
Installing the FOMA
Communication Setting File
Installing the FOMA Communication
Setting File (Driver)
Release button
Release button
S
T
Manual for PC connection setting_DT20.fm 5 ページ ２００７年１２月２５日 火曜日 午後３時４５分