Docomo Foma SH905iTV, Instruction Manual

Page: 546 / 579

13
Manual for PC connection setting_DT20.fm
2
Select [
パケット通信
(HIGH-SPEED
対応端末 )] (Packet transmission
(HIGH-SPEED compatible terminal ))
and click [
次へ
] (Next).
Windows Vista
Select [ パケット通信 ] (Packet transmission)
and click [ 次へ ] (Next).
3
Select [ 『 mopera U 』への接続 ]
(mopera U connection) or
[
『
mopera
』への接続
] (mopera
connection) and click [ 次へ ] (Next).
mopera U is a paid service that requires
subscription. A subscription confirmation
message appears when mopera U is selected.
Using another provider ( n P. 14)
4
Click [OK] on the [FOMA 端末設定取
得
] (FOMA terminal setting
acquisition) screen.
The Host (APN) setting is acquired from the
FOMA terminal connected to the PC.
Wait until acquisition is completed.
5
Enter the connection name and
click [
次へ ] (Next).
Enter a name in the [
接続名
] (Connection
name) field.
The following single-byte characters cannot be
entered.
¥ / :
＊ ? ! < > | ”
To connect to mopera U and mopera, Notify
caller ID must be enabled. Select [
設定しない ]
(No) or [186 を付加する ] (Add 186).
mopera U supports both PPP connections and
IP connections. When using overseas, select IP
connections for the connection method and [
設
定しない ] (No) for Notify caller ID.
mopera supports PPP connections only.
Cannot be used overseas.
6
Click [
次へ
] (Next).
When using mopera U or mopera, [ ユーザー
ID] (User ID) and [
パスワード
] (Password) can
be left blank to connect.
For Windows XP and Windows 2000, specify
the users to whom rights are granted.
Windows Vista
The setting in steps 7 and 8 is not necessary.
Proceed to step 9.
7
Make sure that [
最適化を行う
]
(Optimize) is checked
E
and click
[ 次へ ] (Next).
The transmission settings on the PC are
optimized for using FOMA packet transmission.
This screen does not appear if the W-TCP
setting has already been optimized. Proceed to
step 9.
Manual for PC connection setting_DT20.fm 13 ページ ２００７年１２月２５日 火曜日 午後３時４５分