Docomo Foma SH905iTV, Instruction Manual

Page: 568 / 579

35
Manual for PC connection setting_DT20.fm
AT+CR=<mode> Sets whether to display packet
transmission/64K data
communications before
“CONNECT” result code is
displayed during line connection.
*1
“GPRS” is displayed for packet
transmission, and “SYNC” is
displayed for 64K data
communications.
<mode>
0:
Does not display when line is connected
(default setting)
1: Displays when line is connected
AT+CR=1
o
OK
ATD
*
99
***
1#
+CR:GPRS
CONNECT
AT+CRC=<n> Sets to use extended results code
at reception.
*1
n=0: Does not use extended results code
(Default setting)
n=1: Uses extended result codes
AT+CRC=0
o
OK
AT+CREG=<n> Sets service area information on
or off.
*1
When AT+CREG=1 is set, information is set
in the format “+CREG:<stat>”. 0, 1, 4 or 5 can
be set for the <stat> parameter.
<n>
0:
Does not send (default setting)
1: Sends
<stat>
0:
Outside area
1: Inside area (home)
4: Unknown
5: Inside area (visitor)
AT+CREG=1
o
OK
(Set to send)
AT+CREG?
o
+CREG:1,0
OK
(Indicates outside
area)
+CREG:1
(Moved from
outside area to
inside area)
AT+CUSD=[<n
>[,<str>[,<dcs>]
]] Changes setting toward net for
optional services, etc.
*1
<n>
0:
Answers without intermediate result
(default setting)
1: Answers with intermediate result
<str>
Service code
※
Refer to “Mobile Phone User’s Guide
[Network Services]”.
<dcs>
0: fixed value
AT+CUSD=0,“xxx
xxx”
o
OK
AT+FCLASS=<
n> Sets the mode.
*1
<n>
0:
data (fixed value)
AT+FCLASS=0
o
OK
AT+GCAP Displays the ability list of the
FOMA terminal.
*2
―
AT+GCAP
o
+GCAP:+CGSM,
+W
OK
AT+GMI Displays FOMA terminal maker
name in single-byte alphanumeric
characters.
*2
―
AT+GMI
o
SHARP
OK
AT+GMM Displays abbreviated FOMA
terminal product name (FOMA
SH905iTV) in alphanumeric
characters.
*2
―
AT+GMM
o
FOMA SH905iTV
OK
AT+GMR Displays FOMA terminal
version.
*2
―
AT+GMR
o
Ver1.00
OK
AT+IFC=<n,m> Sets local flow control format
between the PC and FOMA
terminal.
*1
DCE by DTE (<n>)
0:
No flow control
1: XON/XOFF flow control
2: RS/CS (RTS/CTS) flow control
(default setting)
DTE by DCE (<m>)
0:
No flow control
1: XON/XOFF flow control
2: RS/CS (RTS/CTS) flow control
(default setting)
AT+IFC=2,2
o
OK
AT+WS46? Displays wireless network used to
call. Incoming signals are not
affected.
*2
n=22: FOMA network (fixed value) AT+WS46?
o
22
OK
AT Command Overview Parameter/Explanation
Execution
Example
[M]
[M]
[M]
[M]
[M]
[M]
[M]
[M]
[M]
[M]
[M]
Manual for PC connection setting_DT20.fm 35 ページ ２００７年１２月２５日 火曜日 午後３時４５分