Docomo Foma SH905iTV, Instruction Manual

Page: 554 / 579

21
Manual for PC connection setting_DT20.fm
When nothing appears on the screen
when AT commands are entered
ATE1
o
Refer to P. 36 for details on AT commands.
When resetting APN settings using
AT commands
AT+CGDCONT=
o
: To reset all the cids
AT+CGDCONT=<cid>
o
: To reset only specific
cids
When reset, <cid>=1 returns to “mopera.ne.jp”
(default setting), <cid>=3 returns to “mopera.net”
(default setting) and settings for <cid>=2 or 4 to 10
are unregistered.
When confirming APN settings using
AT commands
AT+CGDCONT?
o
Refer to P. 33 for details on AT commands.
7
Confirm that [OK] appears and
select [
ハイパーターミナルの終了
]
(Exit hyper terminal) from the [ ファ
イル
] (File) menu.
Hyper terminal ends.
[ セッション×××を保存しますか？ ] (Save
session xxx?) appears. However there is no
need to save.
Handset number (Caller ID) is important personal
information. Use caution when setting.
1
Follow steps 1 to 5 of “Setting the
Host (APN)” on P. 20.
2
Set either Send caller ID (186) or
Not send caller ID (184) during
packet transmission.
Enter in the format: “AT
*
DGPIR=<n>”
(
n
P. 32).
AT * DGPIR=1
o
:
Adds “184” when packet transmission is
established with the host (APN).
AT * DGPIR=2
o
:
Adds “186” when packet transmission is
established with the host (APN).
3
Confirm that [OK] appears.
J
Send/Not send setting on dial-up
networks
Adding “186” (Send) and “184” (Not send) to the
host number in dial-up networks is also possible.
Setting “186” (Send) and “184” (Not send) in both
the
* DGPIR command setting and the dial-up
network setting results in the following.
Setting Send/Not Send Caller ID
Manual for PC connection setting_DT20.fm 21 ページ ２００７年１２月２５日 火曜日 午後３時４５分