Docomo Foma SH905iTV, Instruction Manual

Page: 558 / 579

25
Manual for PC connection setting_DT20.fm
9
Confirm all the settings in the [
全般
]
(General) tab.
When two or more modems are connected to
the PC, make sure that [FOMA SH905iTV] in
[
接続の方法
] (Connect using) shows
E
. When
H
appears instead, change to
E
. For modems
other than [FOMA SH905iTV], change E to H .
Confirm that [ ダイヤル情報を使う ] (Use dialing
rules) shows H . When E appears instead,
change to
H
.
10
Click the [
ネットワーク
] (Networking)
tab and confirm all settings.
In the [ この接続は次の項目を使用します ]
(Components checked are used by this
connection) field,
E
should appear only for [
イ
ンターネットプロトコルバージョン４
(TCP/
IPv4)] (Internet protocol version 4 (TCP/IPv4)).
Set [QoS
パケットスケジューラ ] (QoS packet
scheduler) according to the instructions of the
provider.
11
Click the [
オプション
] (Option) tab
and click [PPP 設定 ] (PPP setting).
The PPP setting screen appears.
12
Check all options to show
H
and
click [OK].
The option setting screen reappears.
13
Click [OK].
The host and TCP/IP protocol are set.
Refer to P. 27 for details on connecting to
dial-up network.
J
Setting a dial-up network on Windows
2000
On Windows 2000, use
ネットワークの接続ウィ
ザード (Network Connection Wizard) to set both
the host (APN) and TCP/IP protocol.
Example: Using <cid>=3 to connect to mopera U, the
DoCoMo Internet connection service
Subscription to mopera U requires a charge.
1
Click [
スタート
] (Start) menu
b
[
プログラ
ム
] (Programs)
b
[
アクセサリ
]
(Accessories)
b
[ 通信 ] (Communications)
b
[ ネットワークとダイヤルアップ接続 ]
(Network and dial-up connections).
The network and dial-up connections screen
appears.
2
Double-click the [
新しい接続の作成
]
(Create new connection) icon.
The location information screen appears.
This screen appears the first time the [
新しい接
続の作成
] (Create new connection) icon is
double-clicked.
For the second and subsequent times, proceed
to step 5.
3
Enter [
市外局番
] (Area code) and
click [OK].
The phone and modem options screen appears.
4
Click [OK].
A network connection wizard screen appears.
5
Click [ 次へ ] (Next).
The screen to select network connection type
appears.
6
Select [
インターネットにダイヤル
アップ接続する
] (Dial-up to the
Internet) and click [
次へ
] (Next).
A wizard startup screen appears.
7
Select [ インターネット接続を手動で
設定するか、またはローカルエリア
ネットワーク
(LAN)
を使って接続し
ます
] (Connect to Internet manually
or through local area network
(LAN)) and click [
次へ
] (Next).
The screen to select the Internet appears.
8
Select [
電話回線とモデムを使ってイ
ンターネットに接続します
] (Connect
through phone line and modem)
and click [
次へ
] (Next).
A screen to specify the modem appears.
Manual for PC connection setting_DT20.fm 25 ページ ２００７年１２月２５日 火曜日 午後３時４５分