Docomo Foma SH905iTV, Instruction Manual

Page: 555 / 579

22
Manual for PC connection setting_DT20.fm
Enter “AT * DGPIR=0” to return “186” (Send)/“184” (Not
send) to [Not set] (default setting).
Set [Send] for sending caller ID when using mopera U
or mopera, the DoCoMo Internet connection service.
Set the host and TCP/IP protocol. Contact the
Internet service provider or network administrator
for more information on settings.
J
Hosts
For packet transmissions, set the host (APN) in
advance. Register numbers (cid) 1 to 10 for the
host (APN) in advance, to enable using packet
transmission by specifying control numbers. Host
(APN) settings are the equivalent to a phonebook
for packet transmissions on a PC. Compared to
normal phonebook entries, they appear as follows.
For example, when the mopera host (APN),
mopera.ne.jp , is registered for cid1, connecting
to mopera is possible by specifying the host
number “
* 99 *** 1#”. Other registered cids can be
used similarly.
*
99
***
1# : Connects to host (APN) registered
to cid1. Alternatively, connect with
just
* 99#.
* 99 *** 2# : Connects to host (APN) registered
to to cid2.
*
99
***
10# : Connects to host (APN) registered
to cid10.
As the default setting, mopera.ne.jp , the APN
used to connect to mopera is registered for cid1,
and
mopera.net , the APN used to connect to
mopera U is registered for cid3. When connecting
to a corporate LAN or Internet service providers
other than mopera or mopera U, register the host
(APN) using cid2 or cid4 to 10 (
n
P. 20).
For 64K data communications, enter the access
point phone number supplied by the Internet
service provider or network administrator.
Contact the Internet service provider or network
administrator for more information on settings.
Access point phone number is “ * 8701” for mopera U
and “ * 9601” for mopera when using 64K data
communications.
When using packet transmissions, enter “
*
99
***
3#” for
mopera U and “ * 99 *** 1#” for mopera (default setting).
J
Setting a dial-up network on Windows XP
On Windows XP, use ネットワークの接続ウィ
ザード (Network connection wizard) to set both
the host (APN) and TCP/IP protocol.
Example: Using <cid>=3 to connect to mopera U,
the DoCoMo Internet connection
service
Subscription to mopera U requires a charge.
1
Click [ スタート ] (Start) menu
b
[ す
べてのプログラム
] (All programs)
b
[
アクセサリ
] (Accessories)
b
[
通信
]
(Communications)
b
[
ネットワーク
接続 ] (Network connections).
The network connections screen appears.
2
Click [
新しい接続を作成する
] (Create
new connection) in [
ネットワークタ
スク ] (Network tasks).
A new connection wizard screen appears.
3
Click [
次へ
] (Next).
The screen to select network connection type
appears.
4
Select [ インターネットに接続する ]
(Dial-up to the Internet) and click [
次
へ
] (Next).
A preparation screen appears.
5
Select [ 接続を手動でセットアップす
る
] (Manually set up Internet
connection) and click [ 次へ ] (Next).
The Internet connection screen appears.
6
Select [
ダイヤルアップモデムを使用し
て接続する
] (Connect through phone
line and modem) and click [ 次へ ]
(Next).
A screen to specify the device appears.
Dial-up network
setting
(when <cid>=1)
Using the
* DGPIR
command Send/
Not send setting
Send/Not send
caller ID
*
99
***
1# Not set
(default setting) Send
Not send Not send
Send Send
184
*
99
***
1# Not set
(default setting) Not send
(dial-up network
“184” is given
priority)
Not send
Send
186 * 99 *** 1# Not set
(default setting) Send
(dial-up network
“186” is given
priority)
Not send
Send
Setting the Dial-up Network
In phonebook
In Packet transmission
setting
Registered number
(memory number) Control numbers (cids) 1 to 10
Other party’s name Host name (host (APN))
Other party’s phone
number
*
99
***
<cid>#
Manual for PC connection setting_DT20.fm 22 ページ ２００７年１２月２５日 火曜日 午後３時４５分