Docomo Foma SH905iTV, Instruction Manual

Page: 57 / 579

55
e02_dt20_7e.fm
[55/56]
Be
fore
Us
ing
the
H
andset
Display your number (caller ID) on the other party’s phone
(display) when making a voice/Videophone call or
transmission PushTalk.
Handset number (caller ID) is important personal information. Be
very careful about your caller ID setting.
The Notify caller ID function is available only on compatible phone
devices.
1
In the Custom menu, select [Settings]
/
[NW
Services]
/
[Notify caller ID]
/
[Notify caller ID].
2
Select the setting.
To notify caller ID: Select [Yes].
To not notify caller ID: Select [No].
When Auto time correction is set to [ON]
The FOMA automatically adjusts the time by connecting to the
DoCoMo network’s time information.
When time difference is adjusted, [Time adjusted] appears. When
Auto time correction is set to [ON], the time is sometimes not
adjusted for a while. To activate Auto time correction, turn off
FOMA terminal power and restart.
Time is not adjusted depending on the signal status.
Time may be off by a few seconds.
When time difference is adjusted overseas, the local time and date
and
!
appear in Redial, Received calls, Received/Sent messages
(SMS only), and Received/Sent messages list. The received/sent
messages are not displayed in order of the displayed time and
date but the mail reception/send.
!
does not appear in the Unsent messages for mail messages. If
the date order display is set for the Unsent messages, unsent
messages are displayed in the order of the displayed time and
date.
Time correction may not be performed depending on the overseas
network.
During overseas use, Japan time and local time (or time set in
City) appear in the dual display except for the following cases.
When Auto time correction is set to [ON] and time correction
information is not being received from an overseas network
When Auto time correction is set to [OFF] and City is set to the
city in the same time zone as Japan
Related Operations
Change the time zone manually
<City>
In the Date settings screen, select the [Auto time
correction] field
/ t /
[OFF]
/ C /
select a time zone
/
t /
select a city
/ t / i
.
Note
Notify caller ID
Sending your own phone number to
the other party
Setting up Notify caller ID/No caller ID in advance
Note
Notify caller ID cannot be set while
A
(Out of service area)
appears on the screen.
Related Operations
Check the Notify caller ID setting
In the Custom menu, select [Settings]
/
[NW Services]
/
[Notify caller ID]
/
[Status request].
dt20_E.book 55 ページ ２００７年１２月２５日 火曜日 午後２時２２分