Docomo Foma SH905iTV, Instruction Manual

Page: 278 / 579

276
e13_dt20_7e.fm
[276/292]
1Se
g
When 1Seg is activated for the first time, it cannot be activated in
the condition that communication is disabled.
1Seg is not available when the FOMA card is not inserted,
subscription with DoCoMo is canceled, or the FOMA service is
disabled.
When 1Seg is repeatedly played in the condition that
communication is disabled (for example, the FOMA terminal is in
Self mode or outside the FOMA service area), 1Seg may not be
activated even if the inserted FOMA card is subscribed to DoCoMo.
In such cases, move into the FOMA service area and reactivate
1Seg in there.
If 1Seg is used for a long time while charging, the service life of the
battery pack may become shorter than estimated.
DoCoMo shall not be liable for any loss of stored content from a
FOMA terminal entrusted to us for repair, service, or any other
matter.
Before changing the model or asking for repair of your FOMA
terminal, it is recommended to make a copy of the stored contents
(still pictures taken from 1Seg, TVlink, data in the broadcasting
storage area, etc.) by preparing a memo or other means.
1Seg cannot be used overseas since the broadcasting format and
the broadcasting frequency are different (1Seg programs
video-recorded on the FOMA terminal can be watched).
To watch 1Seg, first set the channels, and then select the
channel list in the Channel setting.
A channel list can be registered using either automatic channel
setting or preset channel setting.
Up to nine channel lists can be registered. Each channel list can
have up to 62 stations.
Select a region/area. The terminal begins to search for broadcast
stations and then registers them into the channel list.
Perform Auto channel set inside the area of a terrestrial digital TV
broadcasting service.
1
In the Custom menu, select [1Seg]
/
[Channel setting].
In stand-by: Press
x
(for 1+ seconds)
/
[Channel setting].
2
Select a number to save
/ C /
[Auto channel
set]
/
[Yes].
Alternatively, press
m
, and then perform Auto channel set.
3
Select a prefecture/district
/ t
.
Searching broadcast stations starts. It takes approximately 40
seconds to end the search.
4
Press
t /
[Yes].
Other notes for 1Seg
Channel Setting
Setting channels
Automatically saving a broadcast station into the
channel list
<Auto channel set>
dt20_E.book 276 ページ ２００７年１２月２５日 火曜日 午後２時２２分