Docomo Foma SH905iTV, Instruction Manual

Page: 500 / 579

498
e22_dt20_7e.fm
[498/504]
Ap
pe
nd
ix/
E
xte
rna
l Dev
ic
es/
Tr
ou
bl
esh
oo
tin
g
Set auto-update to [Enable] to automatically update pattern definitions
when a new version becomes available.
When auto-update is successful, a message stating so appears.
Auto-update is not performed depending on the status of the FOMA
terminal. In such cases, a message stating that pattern definitions
have been updated appears.
1
In the Custom menu, select
[Settings]
/
[General settings]
/
[Scanning function]
/
[Set
auto-update]
/
[Enable].
2
Select [Yes]
/
[Yes]
/
[Agree].
When data that can cause malfunctions are detected, a warning
screen appears.
■
Displaying scanned results
Updating pattern definitions automatically
<Set auto-update>
Note
Information regarding Enable/Disable for Set auto-update is saved
on the network. Therefore, [Enable] is always selected on the
FOMA terminal when setting.
When setting auto-update, information about the FOMA terminal
(model, serial number, etc.) is automatically sent to the server
(DoCoMo scan function server). Sent information is only used for
pattern definition update.
Set auto-update may be interrupted if signal is weak.
Displaying scanned results
Level 0
Displaying, activating, and
calling are available. Appears
when there was an error
previously, but there is no
error presently. Select [Agree]
to display, activate, or call.
Level 1
Select [No] to display,
activate, or call.
Select [Yes] to cancel the
operation.
Level 2
Displaying, activating, and
calling are not available.
Select [Agree] to end.
dt20_E.book 498 ページ ２００７年１２月２５日 火曜日 午後２時２２分