DINA SafeLine DNSL-ZM, Product Information

Page: 21 / 48

Product information
Products: safety technology SafeLine redaction 11 date 10.04.09 page 21 from 48
DNSL-ZMA: Central module
Connection scheme
0V U
V24
COM PORT
Netzteil
Power supply
24V DC
I1 I2 I3 I4 I5 I6 O1 O2 O3 Uref A2 A1
0V
24V intern
6A
Eingänge / Inputs Ausgänge / Outputs UB = 24V DC
analog
Wiring layer
Inputs usage Look at DNSL-ZM page 10
Outputs usage Look at DNSL-ZMB page 14. The contacts output 13-13, 23-24 are not available
Special function Look at DNSL-ZMB page 14
Parameter mask
Look at page 8 and 9, for DNCO function at page 12
Fields for the voltage value of the potentiometer Fields for the frequency value of the encoder
Slection of the monitoring 1 or 2 at
DNSL-DS
Selecting the DNCO mask
Button to
transfer the
voltage and
Frequency
value
After the
transfer has
to be accept
look at
DNSL-ZM.
Tolerance addition for the monitored frequency
till +20% is possible
The voltage value in the fields AN01, AN02, AN13, AN14 and AN15 can not be changed. These values is used for
the cross-circuiting detection. There for the used voltage range is only from 10 to 90%.
DNCO function with „Teach function“
This function enables the monitoring of the circumferential speed as example of a grinding wheel.
Parameter mask DNSL-DS : Selection of the frequency table analogue via DNSL-ZMA mask
The fields in the frequency table have to be filled with frequency values, which are higher, than the
drive motion can be decrease. In this case no Emergency Stop is possible.
Look at the adjustment of DNCO via the parameter mask of DNSL-DS.
Parameter mask DNSL-ZMA: Selection of DNCO table
Parameter mask DNCO table
Selection of the position DNSL-DS at the rack
Parameter mask DNCO table
Selection „Teaching analog“ in the analogue table
The voltage value at the potentiometer will be record.
Potentiometer
Parameter mask DNCO table
Adjusting of the entry speed via the potentiometer, after activate the button . The frequency
value of the encoder appears finally a mask appears with the details as example: DNCO:
9064 analog: 9.
The analogue value will record with a click at OK.
This action has to be repeat for all 10 possible values.