Fitting a lens
Digital Projection E-Vision Laser 15000 Series
Fitting a lens hood
FDA regulations require that a lens
hood (p/n:121-867) is permanently
fitted when using the 3.58 - 5.38 : 1
zoom lens or the 5.31 - 8.26 : 1
zoom lens with the E-Vision Laser
15000 projector in the United
States of America. Fitting can be
provided by your reseller or System
Integrator.
A lens hood can be fitted to the projector after the lens is inserted.
2
1
1. Place the hood over the
lens and align the screw
holes on the hood with the
holes on the bottom of the
projector
1
.
2. Screw in the two M4x16
screws
2
to secure the
hood to the projector.
Installation & QuickStart Guide
Rev B April 2021
page 23
Notes
