Digital Projection E-Vision Laser 15000 Series
3D connections
3D frame packed, side-by-side and top and bottom formats
See 3D formats on page 127 for
information about supported 3D
frame packed, side-by-side and top
and bottom formats.
1. Connect to one of the following inputs on the connection panel:
l
HDMI I
l
HDMI II
l
HDBaseT
2. Set the
3D Format
in the 3D menu to match the format of the incoming signal. Choose from:
1.
Auto
2.
Side by Side (Half)
3.
Top and Bottom
4.
Frame Packing
. This format is automatically detected by the projector.
Frame sequential
See 3D formats on page 127 for
information about supported 3D
frame sequential formats.
1. Connect to one of the following inputs on the connection panel:
l
HDMI 1HDMI IHDMI A
l
HDMI 2HDMI IHDMI A
l
DisplayPort
l
DVI-D
2. Set
3D Format
in the
3D
menu to
Frame Sequential
.
Dual Pipe (Left/Right)
See 3D formats on page 127 for
information about supported 3D
dual pipe formats.
1. Connect the left eye output to the
HDMI I
socket and the right eye output to the
HDMI II
socket.
2. Set
3D Format
in the
3D
menu to
Dual-Pipe
.
Rev B April 2021
page 42
Connection Guide
Notes
