Using the projector
Digital Projection E-Vision Laser 15000 Series
Laser
Laser
Power Mode
Normal
Power Level
– – – –
Constant Brightness
Off
l
Power Mode
l
Eco
will automatically set the laser power to 80%.
l
Normal
will set the power to 100%.
l
Set to
Custom
if you wish to adjust the power manually.
l
Power Level
This setting is only available if
Power Mode
is set to
Custom
.
Choose a value between 30 and 100, ranging from 30% to 100% laser power.
l
Constant Brightness
Once the
Power Mode
has been set to
Custom
, then Constant Brightness can be turned
ON
.
The Constant Brightness setting will maintain the projectors set brightness until the maximum laser
power has been reached (this maximum laser power will decrease overtime). Hence, the lower the set
Constant Brightness power level the longer the set brightness output will be maintained.
Operating Guide
Rev B April 2021
page 87
Notes
