Digital Projection E-Vision Laser 15000 Series
Using the projector
1
2
3
4
5
Horizontal and vertical keystone corrections
1.
Projector to the left
The projector is positioned to the
left of the screen. To correct, apply a positive
Horizontal Keystone
value using the
RIGHT
arrow
button.
2.
Projector to the right
The projector is positioned to
the right of the screen. To correct, apply a negative
Horizontal Keystone
value using the
LEFT
arrow
button.
3.
Projector high
The projector is positioned above the
screen at a downward angle. To correct, apply a
negative
Vertical Keystone
value using the
DOWN
arrow button.
4.
Projector low
The projector is positioned below the
screen at an upward angle. To correct, apply a
positive
Vertical Keystone
value using the
UP
arrow
button.
5.
Projector straight
The projector is directly opposite
the screen at a right angle both horizontally and
vertically. No correction is needed.
Rev B April 2021
page 70
Operating Guide
Notes
