Digital Projection E-Vision Laser 15000 Series
Operating the projector
Projector indicators
POWER
STATUS
LIGHT
TEMP.
Indicators
l
TEMP.
Off = no problem
Flashing red = temperature error
l
LIGHT
Off = light is switched off
Flashing green (cycles of single flashes) = shutter is on and light is temporarily off
Flashing red (cycles of single flashes) = light cannot can't be ignited during warm up
Flashing red (cycles of double flashes) = light extinguished during normal operation
On, amber = light is in forced ECO mode at high temperature
On, green = light is switched on
l
STATUS
Off = no problem
Flashing amber (cycles of double flashes) = request to perform lens calibration
Flashing green (cycles of double flashes) = lens calibration in progress
Flashing red (cycles of single flashes) = cover error
Flashing red (cycles of double flashes) = TEC/color sensor problem
Flashing red (cycles of four flashes) = fan error
On, red = system error
l
POWER
Off = the projector is switched off
Flashing green = the projector is warming up
Flashing amber = the projector is cooling down to standby mode
Flashing red = the projector is preparing to go into network standby mode
On, red = standby mode, power saving without network control
On, amber = standby mode, power saving with network control
On, green = the projector is switched on
Rev B April 2021
page 28
Installation & QuickStart Guide
Notes
