Digital Projection E-Vision Laser 15000 Series
Operating the projector
Selecting an input signal
Please refer to the connection
guide for details about connecting a
signal source. See Signal inputs on
page 38
1. Connect one or more image sources to the projector.
2. Select the input you want to display:
l
Press one of the input buttons on the remote control.
l
Alternatively, open the On-screen display (OSD) by pressing
MENU
. Highlight
Input
from the main menu, press
ENTER/OK
and then select an
input signal using the
UP
and
DOWN
arrow buttons. Press
ENTER/OK
to confirm your choice.
Selecting a test pattern
The following test patterns are available: White, Black, Red, Green, Blue, Checkerboard, White Crosshatch, Red Crosshatch, Green Crosshatch, Blue
Crosshatch, Color Bar, Screen Layout, Off
To display a test pattern:
l
Press
TEST
on the remote control.
Change the test pattern using the
LEFT
and
RIGHT
arrow buttons.
l
Alternatively, open the OSD by pressing
MENU
. Highlight
Test Patterns
from the main menu, then select a test pattern using the
LEFT
and
RIGHT
arrow
buttons.
After the final test pattern, the projector exits test pattern mode and returns to the main image. To view test patterns again, you need to press
TEST
again. If you
wish to exit the test patterns before you reach the final one, press
TEST
or
EXIT
at any time.
Rev B April 2021
page 34
Installation & QuickStart Guide
Notes
