Using the projector
Digital Projection E-Vision Laser 15000 Series
Memory
Memory
Recall Memory
Default
Save Settings
Preset A
Presets from one input cannot be
applied to another input.
See on page 1 for information about
the parameters that can be saved
in a memory preset.
The current image settings can be saved as a preset, which you can recall later. The default settings can be
recalled at any time as well.
Up to four custom presets can be stored for each input.
The following settings are saved in a preset:
l
From the
Image
menu —
Dynamic Black, Gamma, Brightness, Contrast, Saturation, Hue,
Sharpness, Noise Reduction
l
From the
Color
menu —
Color Space, Color Mode, ColorMax, Color Temperature, Red Lift, Green
Lift, Blue Lift, Red Gain, Green Gain, Blue Gain
l
From the
Geometry
menu —
Aspect Ratio, Overscan
To recall a saved preset:
l
Select
Recall Memory
and press
ENTER/OK
, then select a preset from
Preset A
to
Preset D
. Select
Default
to load factory default values.
To save a preset:
l
Select
Save Settings
and press
ENTER/OK
, then choose from
Preset A
,
Preset B, Preset C
and
Preset D
.
Operating Guide
Rev B April 2021
page 93
Notes
