Digital Projection E-Vision Laser 15000 Series
Control connections
Control connections
Only one remote connection
(RS232 or LAN) should be used at
any one time.
With a LAN connection the
projector can serve a web page
offering status and projector
controls.
Projector Controller
is available
for download, free of charge, from
the Digital Projection website.
1
2
3
4
WIRED
REMOTE
HDBaseT/LAN
HDMI 1
DISPLAYPORT
DVI-D
IN
OUT
HDMI II
IN
TRIGGER
RS-232
V
H
B/Pb
G/Y
R/Pr
VGA
OUT
MONITOR OUT
SDI
3D SYNC
USB
1.
Trigger
Trigger outputs are defined in the
Setup
menu. Each
ouput can be triggered by one of the following
conditions:
l
Screen trigger
. A trigger output can be used
to control an electrically operated screen. The
screen will be automatically deployed when
the projector starts up and retracted when the
projector shuts down.
l
Aspect ratio trigger
. A trigger output can be
used to control screen shuttering for different
aspect ratios.
l
RS232 trigger
. A trigger output can be used
to control the screen or screen shuttering on
receipt of an RS232 command.
2.
RS232
All of the projector’s features can be controlled via a serial connection, using commands described in the
Protocol Guide
. Use a crossover cable to
connect directly to a computer.
3.
Wired Remote
The remote control can be connected using a standard 3.5 mm mini jack cable (tip-ring-sleeve, or TRS).
4.
HDBaseT/LAN
The projector’s features can be controlled via a HDBase-T or LAN connection, using Digital Projection’s
Projector Controller
application or a terminal-
emulation program.
Rev B April 2021
page 44
Connection Guide
Notes
