Digital PRIORIS HX MP Server
Digital PRIORIS HX MP Server
Troubleshooting
Troubleshooting
MCS Logistics Engineering - Nijmegen
MCS Logistics Engineering - Nijmegen
75
75
P
R
I
O
R
I
S
H
X
M
P
Monitor Troubleshooting
(continued)
Problem
Possible Cause
Action
No monitor
display while
loading
Windows
video drivers
Monitor type incorrectly set.
Set the correct monitor type. Refer to
appropriate video driver documentation.
Distorted-
rolling-or
flickering
screen display-
or wrong /
uneven color
Monitor incorrectly adjusted.
Monitor signal cable
incorrectly installed.
Adjust accordingly.
Straighten any bent connector pins and then
reconnect.
Color monitor
displaying
monochrome
Server was turned on before the
monitor was turned on.
Video jumper incorrectly set.
Turn off the server, turn on the monitor, then turn
the server back on.
Set the jumper for VGA operation.
Monitor fails
to switch to
high-
resolution
mode
Appropriate high-resolution
video drivers are not installed
or incorrectly installed.
Correctly install all appropriate high-resolution
video drivers. Refer to the documentation
supplied with the monitor and/or video drivers.
Monitor
display not
centered while
loading
Windows
video drivers
Monitor type incorrectly set.
Set the correct monitor type.
Refer to appropriate video driver documentation.
QAPlus/FE Advanced Diagnostics
Use QAPlus/FE Advanced Diagnostics to:
♦
Receive system Information, select SysInfo menu from the main menu.
♦
Locate bad chips and run mouse and keyboard tests, select Interact menu.
♦
Edit CMOS, select Setup menu.
♦
Run tests on components, select Testing menu.
Default testing is No Pause on Errors/Single Pass/No Peripherals/No Error Logging/Test All Components.
To change default, select settings under the Testing menu before running tests.
