Digital PRIORIS HX MP Server
Digital PRIORIS HX MP Server
Service Procedures
Service Procedures
MCS Logistics Engineering - Nijmegen
MCS Logistics Engineering - Nijmegen
61
61
P
R
I
O
R
I
S
H
X
M
P
Dual Channel SCSI Bus Configuration (One Internal Channel and
One External Channel)
To connect SCSI devices to a non-RAID dual channel host adapter, perform the following:
1) Connect the SCSI cables as shown in Figure 3 - 23. If necessary, connect appropriate power cable to
device.
2) Replace and lock side panels.
3) Connect external devices and restore power.
4) Run SCU and the SCSI configuration utility to configure the server.
Refer to the SCSI
documentation for additional configuration information.
Legend
Component
A
SCSI host adapter (ID 7, channel A, host termination)
B
68-pin-to-50-pin adapter cable to CD-ROM drive
C
68-pin-to-50-pin adapter cable to top-right drive bay
D
Backplane, 68-pin connector
E
Terminator
(1)
F
Jumper cable
G
External channel
(1)
This terminator can be removed and replaced with a 68-pin wide cable to connect to an external SCSI device.
Figure 3 - 23 Dual Channel SCSI Bus Configuration (One Internal Channnel and One
External Channel)
DEC00571
A
G
E
D
C
B
F
