Service Procedures
Service Procedures
Digital PRIORIS HX MP Server
Digital PRIORIS HX MP Server
62
62
MCS Logistics Engineering - Nijmegen
MCS Logistics Engineering - Nijmegen
P
R
I
O
R
I
S
H
X
M
P
Dual Channel SCSI Bus Configuration (Two Internal Channels)
To connect SCSI devices to a dual channel SCSI host adapter, perform the following:
1) Connect the SCSI cables as shown in Figure 3 - 24. If necessary, connect appropriate power cable to
device.
2) Replace and lock side panels.
3) Connect external devices and restore power.
4) Run SCU and the SCSI configuration utility to configure the server.
Refer to the RAID
documentation for additional configuration information.
Legend
Component
A
External channel
(1)
B
SCSI host adapter (channel B, host termination)
C
Backplane, 68-pin connector
D
Jumper cable
E
Terminator
F
68-pin-to-50-pin adapter cable to top-right drive bay
G
68-pin-to-50-pin adapter cable to CD-ROM drive
H
Cable terminator
I
SCSI host adapter (channel A, host termination)
(1)
The external SCSI connector supports the same SCSI bus as channel A in this configuration.
Figure 3 - 24 Dual Channel
SCSI Bus Configuration (Two
Internal Channels)
DEC00573-2
A
B
C
D
E
F
G
I
H
