Digital PRIORIS HX MP Server
Digital PRIORIS HX MP Server
Service Procedures
Service Procedures
MCS Logistics Engineering - Nijmegen
MCS Logistics Engineering - Nijmegen
51
51
P
R
I
O
R
I
S
H
X
M
P
SBB LED Status Indicators
The hot-swap backplane monitors shelf status to identify error conditions or failures. This status is
displayed on the SBB LEDs. The left LED displays the device activity and the right LED displays the fault
status.
♦
The left LED (green) is the device activity LED and is on or flashing when the SBB is active.
♦
For RAID servers, the right LED (amber) is the SBB fault LED and indicates an error condition when
it is either on or flashing.
CAUTION
For non-RAID servers, removing a SBB when the left LED is on or flashing can cause
the loss or corruption of data.
SBB Status LEDs
Activity
Status LED
Fault Status
LED
Indication
On
Off
Device is operating properly
Flashing
Off
Device is operating properly
Off
Off
Device is inactive and operating normally. There is no fault.
On
On
Fault status, device is hung. Replace SBB.
Off
On
Fault status, device is inactive and spun down. Replace SBB.
On
Flashing
Fault status, device is active and spinning down due to a fault.
