Program XBee Industrial Gateway using
Python
XBee Industrial Gateway Python application and Remote
Manager
Digi XBee Industrial Gateway
61
Example: Configuring the XBee node to report line and upload status
You can configure an XBee node from the network to report the status of the DIO1 each time it
changes and verify that the values are uploaded to Remote Manager.
To configure XBee node to report line and upload status:
1. Ensure the XBee device you are going to configure is attached to an XBee Interface Board
(XBIB). You will use the
User Button 3 (SW3)
of the XBIB to change the status of
DIO1
as it is
directly connected to the
DIO1
of the module.
2. From a web browser, go to the
Home
page of your XBee Industrial Gateway web interface.
3. Under
Configuration
, click
XBee Network
. The
XBee Configuration
page appears.
