Configure XBee network settings
Configure XBee network settings in the web interface
Digi XBee Industrial Gateway
122
6. Click
Advanced
and complete the fields. The advanced radio settings control the behavior of
the XBee module at a more detailed level. See the
topic in the
S2C Zigbee® RF Module User Guide
for more information about the settings on this page.
7. Complete the fields and click
Save
to save your changes.
Configure XBee network settings in the web interface
The
XBee Configuration
page in the XBee Industrial Gateway web interface allows you to configure
each of the XBee devices joined to your network.
1.
2. Under
Configuration
, click
XBee Network
. The
XBee Configuration
page appears.
3. Click
XBee Devices
and complete the fields. See
for more
information.
4. Click the
Node ID
,
Network Address
, or
Extended Address
field for an XBee node. The
Device
Details
page appears.
5. Complete the fields under each of the following sections on the
Device Details
page. See
for more information.
o
Addressing Settings
o
Radio Settings
o
Network Settings
o
Serial Settings
o
Input/Output Settings
6. Repeat steps 3 and 4 for each additional XBee node.
7. Complete the fields under
Network Settings
and click
Apply
to save your changes.
XBee Configuration page
The
XBee Configuration
page in the XBee Industrial Gateway web interface allows you to configure
each of the XBee devices joined to your network.
XBee Devices section
This section provides information on the XBee RF modules on your local XBee Industrial Gateway and
on remote XBee devices.
XBee Device on the Gateway section
This section shows current settings for the XBee RF module in XBee Industrial Gateway. The displayed
XBee RF module information includes:
n
Node ID
: A descriptive, user-friendly name of your choice for the device. The Node ID is a 20-
byte printable ASCII string that allows for referencing devices by names rather than their
physical addresses.
n
Network Address
: The 16-bit network address for the device.
n
Extended Address
: A unique static 64-bit address for the device.
