Configure XBee Industrial Gateway
Configure Remote Manager connectivity settings
Digi XBee Industrial Gateway
111
n
Proxy Server
: The Proxy Server settings configure XBee Industrial Gateway to connect to
Remote Manager using HTTP over proxy. You can create a path to a Remote Manager server
through a local HTTP proxy, such as squid, provided that you use the server to simply remap
the target IP address and port number, without extra authentication or other security
measures. This setting specifies the URL of the system that provides network access.
n
Proxy Server Port
: The port number forwards network connection attempts to the Remote
Manager server. Obtain these values from your Remote Manager server administrator.
Advanced connectivity settings for the web interface
The default settings for Remote Manager usually work for most situations. The Advanced settings
configure the idle timeout for the connection between XBee Industrial Gateway and Remote Manager,
and the keep-alive settings of the various interfaces (TCP and HTTP for mobile and Ethernet network
connections). Only change these settings when the defaults settings do not work properly.
n
Use an HTTP proxy to connect to Remote Manager
(Web interface only): Configures XBee
Industrial Gateway to connect to Remote Manager using HTTP over proxy. You can create path
to a Remote Manager server through a local HTTP proxy, such as squid, provided that you use
the server to simply remap the target IP address and port number, without extra
authentication or other security measures.
n
Proxy Server URL
: The URL of the system that provides network access. Obtain this value
from your Remote Manager server administrator.
n
Proxy Server Port
: That port number forwards network connection attempts to the Remote
Manager server. Obtain this value from your Remote Manager server administrator.
n
Protocol
: The protocol used to configure several aspects of Remote Manager connection and
protocol management.
n
Reconnection delay
Reconnection delay: n seconds
:
These settings control whether to automatically reconnect to Remote Manager after being
disconnected and waiting for the specified amount of time.
If you do not want to automatically reconnect to Remote Manager after a disconnect:
l
From Remote Manager, choose
Never reconnect
.
l
From the web interface, clear the
Reconnection delay
check box.
