About Digi XBee Industrial Gateway
Regulatory information and certifications
Digi XBee Industrial Gateway
10
Digi customers assume full responsibility for learning and meeting the required guidelines for each
country in their distribution market. Refer to the radio regulatory agency in the desired countries of
operation for more information.
CE mark (Europe)
The XBee Industrial Gateway is certified for use in several European countries. For information, visit
www.digi.com/resources/certifications
If the XBee Industrial Gateway is incorporated into a product, the manufacturer must ensure
compliance of the final product with articles 3.1a and 3.1b of the RE Directive (Radio Equipment
Directive). A Declaration of Conformity must be issued for each of these standards and kept on file as
described in the RE Directive.
Furthermore, the manufacturer must maintain a copy of the XBee Industrial Gateway user manual
documentation and ensure the final product does not exceed the specified power ratings, antenna
specifications, and/or installation requirements as specified in the user manual. If any of these
specifications are exceeded in the final product, a submission must be made to a notified body for
compliance testing to all required standards.
OEM labeling requirements
The CE marking must be affixed to a visible location on the OEM product.
CE labeling requirements
The CE mark shall consist of the initials “CE” taking the following form:
n
If the CE marking is reduced or enlarged, the proportions given in the above graduated
drawing must be respected.
n
The CE marking must have a height of at least 5mm except where this is not possible on
account of the nature of the apparatus.
n
The CE marking must be affixed visibly, legibly, and indelibly.
Industry Canada (IC) certifications
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital
apparatus set out in the Radio Interference Regulations of the Canadian Department of
