Configure XBee Industrial Gateway
Configure Remote Manager connectivity settings
Digi XBee Industrial Gateway
107
n
You want to change the instance of Remote Manager to which XBee Industrial Gateway is
connected. See
Connect to a different instance of Remote Manager
.
n
XBee Industrial Gateway operates in a network with firewalls. In this case, you will need to
configure a proxy server. See
.
The basic
Device Cloud Configuration
settings allow you to enable or disable the connection to the
Remote Manager server used for managing the XBee Industrial Gateway device, configure the
Remote Manager server, and configures the proxy server, if used. The Advanced Settings configure
additional behaviors for the Remote Manager connection, including connect and disconnect behaviors,
protocol details, and use of keepalives for the connection. The default settings for Remote Manager
remote management usually work for most situations.
Configuring connectivity settings
To configure connectivity settings, choose one of the following options:
From Remote Manager
:
1. Click the
Device Management
tab.
2. From the device list, double-click the device to display the device properties menu.
3. Click
Advanced Configuration
>
Device Cloud client initiated connection
. The
Device
Cloud client initiated connection
page appears.
a. For
Connection enable
, select the
On
option.
b. Determine the
Connection reconnect timeout
options. See
for information about the settings.
c. Click
Save
to save the changes.
4. Click
Advanced Configuration
>
Device Cloud configuration
. The
Device Cloud
configuration
page appears.
a. The default settings for Remote Manager usually work for most situations. Only
change these settings when the defaults settings do not work properly. See
for information about the settings.
b. Click
Save
to save the changes.
5. Click
Advanced Configuration
>
Device Cloud network type
. You can configure keep-alive
information for ethernet or mobile systems.
a. Click
Device Cloud network type eth
or
Device Cloud network type mobile
.
b. Configure keep-alive information. See
Device Cloud network type page
for
information about these settings.
c. Click
Save
to save the changes.
From the XBee Industrial Gateway web interface
1. Select
Configuration
>
Device Cloud Connectivity
to access the connectivity settings. The
Device Cloud Configuration
page displays the basic settings.
2. Complete the fields under basic settings. See
3. Click
Advanced Settings
. The Advanced Settings section on the
Device Cloud Configuration
page appears.
